PMP - Enhanced waterproofing membrane designed for use in asphalt mixtures that endure high traffic loads and are resistant to increased cracking at elevated temperatures.
Hot mix bitumens of types 50/40, 55/45, and 70/60 are modified bitumens with medium hardness grade, without mineral additives
Bitumen PG 68 - Bitumen PG 70 - Standard Bitumen used in asphalt production
Emulbit STE is an asphalt emulsion used for bonding between existing and new asphalt layers.
It offers excellent adhesion to the asphalt layers
Emulbit 10-MS is a bituminous emulsion intended for use as a primer.
The emulsion has high penetration properties for the substrate layers and rapid drying times in the substrate
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 105/25' is a polymer-modified bitumen with a high level of hardness, without the addition of mineral materials
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 85/40' is a polymer-modified bitumen that combines the characteristics of soft bitumen with those of polymer-modified bitumen
Rubberized Bitumen for Building Waterproofing (Hot Application) - 'Elastex 75/25' is a medium-hardness rubberized bitumen, without the addition of mineral materials.
A two-component elastomeric material for cold application, designed to seal voids and cracks - resistant to fuel, oils, and silicone fuels. "Politar H99" is a two-component elastomeric sealing material based on polysulfide
An enhanced bituminous material with polymers for sealing expansion joints, movement joints, and cracks in asphalt surfaces, parking lots, sidewalks, concrete surfaces, and more.
Politar 61' is a bitumen-based waterproofing material containing synthetic rubber and applied hot.
Elastomeric bitumen for building waterproofing (hot application), 'Alstogum 795' is a high-quality elastomeric waterproofing material based on SBS that forms a flexible layer, maintaining its integrity even during movements and vibrations
A bituminous sheet is made of a special bituminous mass and improved with SBS type polymers.
The sheet without armor alone, and has extremely high flexibility and elasticity.
Bituminous membrane used for coating and protection Bituminous mass armored with felt-like reinforced paper and coated with fine sand on both sides. Tar paper meets the requirements of TI 80
PazDrain FLT 500 is a low-density polyethylene (L.D.P.E) flat membrane, characterized by its flexibility, strength, and high puncture resistance
H.D.P.E Geosynthetic membrane for Protection, Drainage, and Infrastructure, covered with non-woven geotextile fabric, PazDrain Plus is a high-density polyethylene (H.D.P.E) membrane with semi-spherical protrusions covered by non-woven geotextile fabric and a unique solution for mechanical interlocking using a trench / peg method between the membrane and its substrate
H.D.P.E Geosynthetic membrane for Protection, Drainage, and Infrastructure, PazDrain is a high-density polyethylene (H.D.P.E) membrane with semi-spherical protrusions and a unique solution for mechanical interlocking using a trench / peg method between the membrane and its substrate
Bituminous Membrane membrane used for Coating and Protecting Bituminous Mass, Reinforced with Fabric-like Paper and Coated with Fine Sand on Both Sides. Tar Paper meets the requirements of Standard 80
Resistant Glass Mesh for Alkaline Substances, Designed for Reinforcement of Materials Used as Liquid Waterproofing Membrane
Bituminous membrane used as a vapor barrier, consisting solely of reinforced bitumen glass and aluminum foil, and coated with a thin layer of sand on both sides
Bituminous membrane for coating and protection, consisting solely of reinforced bitumen glass and coated with a thin layer of sand on both sides
Helper bituminous membrane complies with standard 1430/3 clause 2.3. The membrane is made of polymer-modified bitumen of the S.B.S type with a glass-fiber reinforcement, topped with a silica sand finish
A polymer-enhanced bituminous membrane, uniformly spread across its entire surface and serving as a flashing in systems for waterproofing pitched roofs using bituminous membranes
A self-adhesive elastomeric bituminous membrane, reinforced only with glass and aluminum foil, with an upper surface of sand or polyethylene.
A thin removable membrane is attached to the lower part of the membrane and the overlap strip, easily detachable before adhesion to the surface and between the overlaps.
A self-adhesive elastomeric bituminous membrane, reinforced only with glass or only with polyester, with an upper surface of sand or polyethylene.
A thin removable membrane is attached to the lower part of the membrane and the overlap strip, easily detachable before adhesion
A self-adhesive elastomeric bituminous membrane, composed of polymer-modified bitumen with only glass fiber reinforcement, possessing self-adhesive capability for a variety of infrastructures.
RapidFlex HP is two-component polymer-modified bitumen latex emulsion for waterproofing bridge deck under asphalt pavements.
PAZ PU-B 500 2K is a two-component sealant A+B in a ratio of 1:1 based on polyurethane and fast-hardening bitumen, creates a strong, elastic and flexible sealing layer, with adhesion (ability Adhesion) is excellent to a variety of surfaces.
Used to protect and seal surfaces that are not directly exposed to the sun such as: concrete surfaces, foundations, basements, balconies, wet rooms, roofs, contained bridges and more. Dries quickly and has excellent resistance to standing water.
A material for sealing insulated pipes and for sealing and whitewashing roofs.
Acrylpaz B is a super white acrylic sealant and coating Water-based, environmentally friendly.
A water-based white polyurethane sealing paste that combines advanced polymers.
Highly resistant to harsh environmental conditions An innovative sealing and coating material that is applied by spraying in two Layers and is a perfect solution for sealing, whitening and reducing heat load in roofs
An white sealing and coating material reinforced with natural fibers designed for roof waterproofing.
"Acrylpaz Platinum" is a white sealing material enhanced with natural fibers that strengthen the sealing layer
Colorful MasterCap is a high-quality water-based waterproofing material enhanced with innovative polymers and environmentally friendly.
The purposes of using MasterCap are aimed at waterproofing, restoration, and protection of flat roofs, metal roofs, roofs coated with bituminous membranes, asphalt shingle roofs, and more
Elastic Bituminous Waterproofing Compound Enhanced with Polymers, Based on Binders
MasterFlex is a high-quality single-component bituminous waterproofing material enhanced with quality polymers and based on water
Master Wall is an innovative water-based waterproofing material that combines advanced polymers with high resistance to water penetration and water vapor.
Innovative Water-based White Waterproofing and Coating Compound that Incorporates Advanced Polymers with High Resistance to Harsh Environmental Conditions.
Master Roof is an innovative waterproofing and coating material applied in two layers, providing a perfect solution for waterproofing, whitening, and reducing heat load on roofs
Infuz H2O is a two-component polyurethane waterproofing and coating compound based on water. It exhibits excellent adhesion properties and high resistance to challenging environmental conditions.
Acrylic Material - Roof Whitener.
'Acrylic Whitener' is a white coating based on high-quality acrylic emulsion
White Reinforced Waterproofing and Coating Material with Natural Fibers for Roof Waterproofing.
ACRYLPAZ Super is a white waterproofing material enhanced with natural fibers that strengthen the waterproofing layer
Roof Waterproofing and Sealing Material, ACRYLPAZ is a white acrylic waterproofing and coating material based on water, environmentally friendly.
Pazkar's solutions are 'green' environmentally friendly solutions with a green standard certification.
Starting from the top, when the roof is exposed to rain in the winter, among the company's products in this category, 'ACRYLPAZ' can be mentioned.
It is a white acrylic waterproofing and coating material based on water and environmentally friendly.
Unlike tar, ACRYLPAZ is water-based, does not emit toxic gases, and does not require heating.
The application of the material is easy and convenient to use
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 105/25' is a polymer-modified bitumen with a high level of hardness, without the addition of mineral materials
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 85/40' is a polymer-modified bitumen that combines the characteristics of soft bitumen with those of polymer-modified bitumen
Rubberized Bitumen for Building Waterproofing (Hot Application) - 'Elastex 75/25' is a medium-hardness rubberized bitumen, without the addition of mineral materials.
Bituminous waterproofing material against roots, praised for its high flexibility, intended for cold application by spraying or brushing.
Elastopaz against roots is a two-component bituminous sealing material, enhanced with quality polymers based on water, environmentally friendly.
Quick-drying sealant against roots for spraying surfaces and walls.
Rapid Flex against roots is a two-component bituminous sealing material enriched with polymers with extremely high flexibility and quick drying applied by spraying.
The material is applied simultaneously with a hardener and a final, strong and flexible sealing layer with excellent mechanical properties and adhesion is immediately obtained.
Pazkarol is a bituminous elastomeric corrosion-resistant sealing material, praised with polymers and reinforced with natural fibers
Pazkarol is a corrosion-resistant sealing material based on bituminous elastomers, enhanced with polymers and reinforced with natural fibers
Single-component bituminous waterproofing material, elastomeric, for cold application.
Elastic modified bitumen sealing compound, highly acclaimed in polymers based on resins
Single-component bituminous sealing material, elastomeric, for cold application. A high-quality elastic bituminous sealing compound, enhanced with polymers, based on solvents
RapidFlex Is a two-component waterproofing material, highly acclaimed in polymers, with the highest flexibility and the fastest drying capability.
The material is applied simultaneously with a trowel and immediately forms a ready-to-use, flexible waterproofing layer with excellent durability and adhesion properties
Two-component high-quality polymer-based waterproofing material, water-based, with rapid drying capability and excellent workability, designed for cold application by spreading.
"Fast-Drying Elastomix" is a high-quality two-component waterproofing material, consisting of a water-based waterproofing compound (Component A) and an accelerator compound (Component B)
A highly polymer-enhanced bituminous waterproofing material suitable for single-layer application in various thicknesses.
Isiflex is a one-component water-based bituminous waterproofing material, enhanced with high-quality polymers, environmentally friendly, and suitable for thick single-layer application
Elastopaz Spray is a single-component bituminous waterproofing material, enhanced with high-quality polymer, water-based, and environmentally friendly
A single-component material based on special and high-quality polymers for waterproofing wet rooms and balconies, Bluetec is a single-component waterproofing material based on special polymers that is applied with precision
Elastoflex is a polymer-enriched bituminous waterproofing material designed for cold spray or brush application.
Elastoflex is a single component, polymer-enriched bituminous waterproofing material, water-based and environmentally friendly.
Elastopaz is a single component, highly flexible waterproofing material designed for cold spray or brush application.
Elastopaz is a single component, polymer-enriched bituminous waterproofing material, water-based and environmentally friendly.
A material for sealing insulated pipes and for sealing and whitewashing roofs.
Acrylpaz B is a super white acrylic sealant and coating Water-based, environmentally friendly.
A water-based white polyurethane sealing paste that combines advanced polymers.
Highly resistant to harsh environmental conditions An innovative sealing and coating material that is applied by spraying in two Layers and is a perfect solution for sealing, whitening and reducing heat load in roofs
An white sealing and coating material reinforced with natural fibers designed for roof waterproofing.
"Acrylpaz Platinum" is a white sealing material enhanced with natural fibers that strengthen the sealing layer
Colorful MasterCap is a high-quality water-based waterproofing material enhanced with innovative polymers and environmentally friendly.
The purposes of using MasterCap are aimed at waterproofing, restoration, and protection of flat roofs, metal roofs, roofs coated with bituminous membranes, asphalt shingle roofs, and more
Reinforced White Waterproofing and Coating Material with Natural Fibers, Intended for Roof Waterproofing.
Reinforced ACRYLPAZ 360 is a highly regarded white waterproofing material enhanced with ecological fibers that strengthen the waterproofing layer
ACRYLPAZ 360 is a white acrylic waterproofing and coating material based on water, environmentally friendly.
ACRYLPAZ 360 is designed for roof waterproofing and sealing
Innovative Water-based White Waterproofing and Coating Compound that Incorporates Advanced Polymers with High Resistance to Harsh Environmental Conditions.
Master Roof is an innovative waterproofing and coating material applied in two layers, providing a perfect solution for waterproofing, whitening, and reducing heat load on roofs
Infuz H2O is a two-component polyurethane waterproofing and coating compound based on water. It exhibits excellent adhesion properties and high resistance to challenging environmental conditions.
Acrylic Material - Roof Whitener.
'Acrylic Whitener' is a white coating based on high-quality acrylic emulsion
White Reinforced Waterproofing and Coating Material with Natural Fibers for Roof Waterproofing.
ACRYLPAZ Super is a white waterproofing material enhanced with natural fibers that strengthen the waterproofing layer
Roof Waterproofing and Sealing Material, ACRYLPAZ is a white acrylic waterproofing and coating material based on water, environmentally friendly.
Pazkar's solutions are 'green' environmentally friendly solutions with a green standard certification.
Starting from the top, when the roof is exposed to rain in the winter, among the company's products in this category, 'ACRYLPAZ' can be mentioned.
It is a white acrylic waterproofing and coating material based on water and environmentally friendly.
Unlike tar, ACRYLPAZ is water-based, does not emit toxic gases, and does not require heating.
The application of the material is easy and convenient to use
A single-component material based on special and high-quality polymers for waterproofing wet rooms and balconies, Bluetec is a single-component waterproofing material based on special polymers that is applied with precision
A solution of an amino complex for improving adhesion to concrete, Primer 99 is a solution of an amino complex
Paz Green is an ecological water-based bituminous primer solution for cold application
Primer for application on bridge decks and damp concrete surfaces with hot elastomeric bitumen. Two-component epoxy primer based on water, in green color
Bituminous foundation solution for cold application, Universal Primer serves as a foundational layer prior to the application of bituminous membranes, bitumen, mastics, and bituminous compounds. Suitable for concrete, asphalt, and metal surfaces
Bituminous foundation solution for cold application, GS/474 Primer serves as a foundational layer prior to the application of bituminous membranes, bitumen, mastics, and bituminous compounds. Suitable for concrete, asphalt, and metal surfaces
Paz Foundation is a water-based bituminous foundation liquid for cold application.
RapidFlex HP is two-component polymer-modified bitumen latex emulsion for waterproofing bridge deck under asphalt pavements.
PAZ PU-B 500 2K is a two-component sealant A+B in a ratio of 1:1 based on polyurethane and fast-hardening bitumen, creates a strong, elastic and flexible sealing layer, with adhesion (ability Adhesion) is excellent to a variety of surfaces.
Used to protect and seal surfaces that are not directly exposed to the sun such as: concrete surfaces, foundations, basements, balconies, wet rooms, roofs, contained bridges and more. Dries quickly and has excellent resistance to standing water.
PMP - Enhanced waterproofing membrane designed for use in asphalt mixtures that endure high traffic loads and are resistant to increased cracking at elevated temperatures.
Hot mix bitumens of types 50/40, 55/45, and 70/60 are modified bitumens with medium hardness grade, without mineral additives
Bitumen PG 68 - Bitumen PG 70 - Standard Bitumen used in asphalt production
Emulbit STE is an asphalt emulsion used for bonding between existing and new asphalt layers.
It offers excellent adhesion to the asphalt layers
Emulbit 10-MS is a bituminous emulsion intended for use as a primer.
The emulsion has high penetration properties for the substrate layers and rapid drying times in the substrate
Elastic Bituminous Waterproofing Compound Enhanced with Polymers, Based on Binders
MasterFlex is a high-quality single-component bituminous waterproofing material enhanced with quality polymers and based on water
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 105/25' is a polymer-modified bitumen with a high level of hardness, without the addition of mineral materials
Heated Polymer-modified Bitumen for Building Waterproofing (Hot Application) - 'Elastex 85/40' is a polymer-modified bitumen that combines the characteristics of soft bitumen with those of polymer-modified bitumen
Rubberized Bitumen for Building Waterproofing (Hot Application) - 'Elastex 75/25' is a medium-hardness rubberized bitumen, without the addition of mineral materials.
Bituminous waterproofing material against roots, praised for its high flexibility, intended for cold application by spraying or brushing.
Elastopaz against roots is a two-component bituminous sealing material, enhanced with quality polymers based on water, environmentally friendly.
Quick-drying sealant against roots for spraying surfaces and walls.
Rapid Flex against roots is a two-component bituminous sealing material enriched with polymers with extremely high flexibility and quick drying applied by spraying.
The material is applied simultaneously with a hardener and a final, strong and flexible sealing layer with excellent mechanical properties and adhesion is immediately obtained.
Pazkarol is a bituminous elastomeric corrosion-resistant sealing material, praised with polymers and reinforced with natural fibers
Pazkarol is a corrosion-resistant sealing material based on bituminous elastomers, enhanced with polymers and reinforced with natural fibers
Single-component bituminous waterproofing material, elastomeric, for cold application.
Elastic modified bitumen sealing compound, highly acclaimed in polymers based on resins
Single-component bituminous sealing material, elastomeric, for cold application. A high-quality elastic bituminous sealing compound, enhanced with polymers, based on solvents
RapidFlex Is a two-component waterproofing material, highly acclaimed in polymers, with the highest flexibility and the fastest drying capability.
The material is applied simultaneously with a trowel and immediately forms a ready-to-use, flexible waterproofing layer with excellent durability and adhesion properties
Two-component high-quality polymer-based waterproofing material, water-based, with rapid drying capability and excellent workability, designed for cold application by spreading.
"Fast-Drying Elastomix" is a high-quality two-component waterproofing material, consisting of a water-based waterproofing compound (Component A) and an accelerator compound (Component B)
A highly polymer-enhanced bituminous waterproofing material suitable for single-layer application in various thicknesses.
Isiflex is a one-component water-based bituminous waterproofing material, enhanced with high-quality polymers, environmentally friendly, and suitable for thick single-layer application
Elastopaz Spray is a single-component bituminous waterproofing material, enhanced with high-quality polymer, water-based, and environmentally friendly
A two-component elastomeric material for cold application, designed to seal voids and cracks - resistant to fuel, oils, and silicone fuels. "Politar H99" is a two-component elastomeric sealing material based on polysulfide
An enhanced bituminous material with polymers for sealing expansion joints, movement joints, and cracks in asphalt surfaces, parking lots, sidewalks, concrete surfaces, and more.
Politar 61' is a bitumen-based waterproofing material containing synthetic rubber and applied hot.
Elastomeric bitumen for building waterproofing (hot application), 'Alstogum 795' is a high-quality elastomeric waterproofing material based on SBS that forms a flexible layer, maintaining its integrity even during movements and vibrations
Elastoflex is a polymer-enriched bituminous waterproofing material designed for cold spray or brush application.
Elastoflex is a single component, polymer-enriched bituminous waterproofing material, water-based and environmentally friendly.
Elastopaz is a single component, highly flexible waterproofing material designed for cold spray or brush application.
Elastopaz is a single component, polymer-enriched bituminous waterproofing material, water-based and environmentally friendly.
Super quality cement adhesive for gluing ceramics, granite, porcelain, marble, mosaic and stone, suitable for gluing ceramics 5-10 mm thick
Super quality cement adhesive for gluing stone, marble, mosaic and porcelain granite on concrete, concrete block and plaster | suitable for gluing 5-10 mm thick
Super high-quality cement adhesive for gluing stone, marble, mosaic, ceramic and porcelain granite on concrete, concrete block and plaster | Suitable for gluing 5-10 mm thick.
A flexible two-component cement mixture, intended for sealing buildings and structural parts against water penetration and moisture.
Approval for contact with drinking water - The Israeli Standards Institute, TA 2545.
A flexible two-component cement mixture, intended for sealing buildings and structural parts against water penetration and moisture.
Approval for contact with drinking water - The Israeli Standards Institute, TA 2545.
A cementitious material for repairing segregations and cracks used to prepare a foundation before applying a cementitious sealant from the CementPaz series 20 kg
A cement mixture for sealing places in the structure where there are breaches and water leaks, applied when the water is still flowing through the concrete element 20 kg
One-component cementitious sealant, to be applied by mixing with water only 20 kg
One-component cementitious sealant, to be applied by mixing with water only 20 kg
Flexible one-component cementitious sealant for sealing bathrooms, balconies and internal and external walls for positive and negative sealing, by mixing with water only and for convenient application without special equipment (brush, mastrina only) 20 kg
Flexible one-component cementitious sealant for sealing bathrooms, balconies and internal and external walls for positive and negative sealing, by mixing with water only and for convenient application without special equipment (brush, mastrina only) 20 kg
Two-component flexible cementitious mortar, designed for waterproofing buildings and structural elements against water penetration and moisture.
Approved for contact with drinking water - Israeli Standards Institute (T.I. 2545)
Customer Service
Our Email
Our Address
Alon Tavor
P.O. Box 2030 | Zip Code 18000
